Vise Grip T Slot Clamp
Clamps include a 5-star knob and a 5/16' T-bolt designed to fit into T-tracks on drill presses, router tables and more. The Hold Down Clamp, 5-1/2'L x 3/4'W provides the same great features as the 5-1/2'L x 1-1/8'W version, but in a slimmer width and without the non-marring rubber tips. These t-track hold down clamps are designed to work with our T-Track opening for either 3/8' or 1/4' sizes. The bottom of the clamp slides neatly into your t-track slot, and is adjustable to anywhere along the track. The clamp is fitted with a 2-3/8” brass foot for excellent holding power. TRISENSE Vise Jaw Covers，Aluminum Multipurpose 4”Soft Vice Inserts-Use On Any Drill Press Vise As Accessories，Gold Vise Jaws Pads（2 Pack In 1） 4.2 out of 5 stars 999 $12.49 $ 12. Locking pliers (or Vise-Grips or a Mole wrench or a vice grip) are pliers that can be locked into position, using an over-center toggle action.
Steel is strong. Much stronger than wood, in fact. However, I think it’s interesting to see how well wood can work for tools that are typically made from steel. Usually if you can make the parts big enough that will close that strength gap, somewhat. But then that added size can make the tool too bulky and unusable. Impractical, in other words.
Take the vise grip clamp, for example. I’ve seen toggle clamps made from wood that seem to work well, and they operate on the same principle. Of course, the wooden versions almost certainly don’t work as well as the steel versions, but might work well enough to be used reliably. And that’s the key: reliability, not ultimate strength.
As is the case for most of my projects that have moving parts, I made a mock up. Two, in fact, and this is the first, less refined version:
Made quickly from lower quality plywood just to get a read on how well the locking mechanism works and how critical the alignment is. Most people take a lot for granted just looking at tools like this, not realizing how much design and trial and error went into it.
Vise Grip Chain Clamp
I spent some time refining the design in SketchUp and that’s what I used to build the second version. I posted a picture of that one on Instagram right after I made it:
Months pass, as they often do, before I get back to this project. I used the original SketchUp drawing to make a quick template sheet for the parts with the idea that I would refine the design while building:
And refine I did. I made a new template sheet that you can print to make one (or a dozen) of these for yourself. Just right click the image an select “save image as” and save it to a convenient location. To print, use standard letter size paper (11 x 8.5) and set the print to fullsize or no scaling.
Note the extend 1-1/8″ – that part was too long for the sheet, so cut it out that much longer on that end.
I used scraps of 1/2″ and 3/4″ Baltic birch plywood to make mine. Plywood is recommended, since it has strength in all directions. I used a glue stick to paste on the parts cut roughly from the template:
Then carefully cut them out on my band saw. I used my router table to cut the 3/8″ slots in these parts:
All of the parts cut out, sanded and the pivot dowels glued in. The video at the bottom of this page shows more details on making the parts:
A quick dry fit to see how everything lines up:
A part not detailed on the template sheet is the block for the adjuster. It’s made from 3/4″ plywood and has a 3/8″ nut glued into a counterbore:
Again, more detail in the video.
With the clamp assembled, I did a nice job of rounding the edges and sanding it smooth to make it more comfortable to use:
And then put on two coats of water based polyurethane. Much, much better to do that before the clamp is assembled, though:
Here it is in action, clamping a glue joint:
Vise Grip Table Clamp
Now, obviously this does not have the same clamping force as a metal version. But it does have enough to be useful for a great many things in the hobbyist shop. An improvement that I want to do with mine is to add swiveling pads to the jaws. That will increase the surface area and make this very handy for clamping two surfaces flush.
Mini Vise Grip Clamps
And while this is a useful clamp, building it can serve another purpose: it will hone your skills when working with projects with moving parts, and it can also make you appreciate the design and build time that goes into these types of tools.
Oh and it looks cool, too!
C Clamp Vise Grips
Here’s the full build video: